34.Route the Press Cable (88) around a 3 1/2Ó Pulley (82). Attach the Pulley and a Cable Trap (80) to the Press Frame (12) with a 3/8Ó x 3Ó Bolt (94), a 3/8Ó Washer (38) and a 3/8Ó Nylon Jamnut (43).
Make sure the Cable Trap (80) is turned to hold the Cable in place and that the Cable is between the Pulley and the crossbar on the Press Frame.
35.Wrap the Press Cable (88) around a ÒVÓ Pulley (81). Attach the ÒVÓ Pulley to the lower bracket on the Leg Press Upright (4) with a 3/8Ó x 2Ó Bolt (50) and a 3/8Ó Nylon Jam Nut (43).
36.Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82). Attach the Pulley and a Cable Trap (80) to the Leg Press Arm (9) with the 3/8Ó x 4 1/2Ó Bolt (74).
Slide another 3 1/2Ó Pulley (82) with a Cable Trap (80) onto the 3/8Ó x 4 1/2Ó Bolt (74). Hand tighten a 3/8Ó Nylon Jamnut (43) onto the Bolt. Do not tighten the
Nylon Jamnut until step 38.
37.Wrap the Press Cable (88) around a ÒVÓ Pulley (81). Attach the ÒVÓ Pulley and a Large Cable Trap (83) to the bracket on the Front Seat Frame (8) with a 3/8Ó x 2 1/2Ó Bolt (65) and a 3/8Ó Nylon Locknut (42). Be sure that the Large Cable Trap is turned to hold the Cable in place and that the Cable and Pulley move smoothly.
34 |
|
|
|
|
| 88 |
|
|
| 82 | 94 |
|
| 38 | |
|
| 80 |
|
|
| 43 |
|
|
| 12 |
|
|
| Crossbar |
|
35 |
|
|
|
|
| 4 |
|
|
| 81 |
|
|
| 88 |
|
|
| 43 |
|
|
| 50 |
|
36 |
|
|
|
|
|
| 43 |
|
|
| 80 |
|
| 9 | 82 |
|
|
| |
|
| 88 |
|
| 74 | 82 |
|
| 80 |
| |
|
|
| |
37 |
| 83 |
|
|
|
| |
|
| 65 |
|
|
| 81 |
|
|
|
| 8 |
|
| 88 |
|
|
| 42 |
|
16
