10.Press a 2Ó Square Inner Cap (56) into each end of the Leg Press Arm (9).
Arm Assembly
11.Locate and open the parts bag labeled ÒARM ASSEMBLY.Ó
Attach the Leg Press Bumper (53) to the Front Seat Frame (8) with the 1Ó Tap Screw (72).
Lubricate the 3/8Ó x 3Ó Bolt (94). Attach the Leg Press Arm (9) to the Press Base (13) with the Bolt and a 3/8Ó Nylon Jamnut (43). Do not overtighten the
Nylon Jamnut, it should be easy to pivot the Leg Press Arm.
12.Press a 1Ó x 7/8Ó Plastic Bushing (54) onto each welded spacer on the Press Frame (12). Slide the Press Frame onto the Press Base (13) so that the Plastic Bushings are aligned with the indicated tube.
Note: This will be a tight fit. Make sure the Press Frame is oriented with the upper set of holes on the side shown.
Lubricate the 3/8Ó x 8Ó Bolt (52). Attach the Press Frame (12) to the Press Base (13) with the Bolt and a 3/8Ó Nylon Locknut (42).
10 |
|
56 |
|
| A |
| 56 |
| 9 |
56 | 56 |
| |
11 |
|
8 |
|
| 9 |
| 53 |
| 43 |
| 72 |
13 | 94ÑLubricate |
12 |
|
| Tube |
Upper | 12 |
Holes |
|
Welded | 13 |
| |
Spacers | 52ÑLubricate |
| |
42 | 54 |
|
9
