7.Lubricate the insides of the holes in the Top Weights (24) as shown. Slide a Top Weight onto each set of Weight Guides (23).
8.Attach the Top Frame (2) to the Lat Upright (1) with two 5/16Ó x 2 3/4Ó Bolts (55), two 5/16Ó Washers (20) and two 5/16Ó Nylon Locknuts (40). Do not tighten the Nylon Locknuts yet.
Attach the Butterfly Frame (3) to the Leg Press Upright (4) with two 5/16Ó x 2 3/4Ó Bolts (55), the Support Plate (98) and two 5/16Ó Nylon Locknuts
(40).Do not tighten the Nylon Locknuts yet.
Press a 2Ó Square Inner Cap (56) into the top end of the VKR Upright.
Attach the VKR Upright (51) to the bracket on the Top Frame (2) with two 5/16Ó x 2 3/4Ó Bolts (55), two 5/16Ó Washers (20) and two 5/16Ó Nylon Locknuts (40). Do not tighten the Nylon Locknuts yet.
9.Attach the upper ends of one set of Weight Guides
(23)to the Top Frame (2) with a 5/16Ó x 6Ó Bolt (67), two 1/2Ó x 3/4Ó Spacers (69) and a 5/16Ó Nylon Locknut (40).
Attach the upper ends of the other set of Weight Guides (23) in the same manner.
Before continuing, firmly tighten all nylon lock- nuts used in steps 1 through 9.
7 |
|
|
| 24 | Lubricate |
|
| |
24 |
|
|
Lubricate |
| 23 |
23 |
|
|
8 |
|
| 55 |
|
|
| 56 |
| 98 | 55 | |
| 55 |
|
|
20 |
|
| 40 |
|
|
| |
2 |
|
| 20 |
|
|
| |
|
| 3 |
|
|
|
| 51 |
1 | 40 | 40 | 4 |
9 |
|
| 69 |
| 40 |
| |
|
| 23 | |
| 69 |
| |
40 |
|
| |
|
| 67 | |
|
|
| |
2 |
|
|
|
| 67 |
|
|
| 23 |
|
|
8
