38.Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82)in the direction shown. Attach the Pulley and two Pulley Covers (94) to the indicated hole in the Press Frame (12) with a 3/8Ó x 3 3/4Ó Bolt (76), two 3/8Ó Washers (38) and a 3/8Ó Nylon Locknut (42). Orient the wide tab on the Pulley Covers as shown.
39.Wrap the Press Cable (88) around a ÒVÓ Pulley (81). Attach the ÒVÓ Pulley to the lower bracket on the Leg Press Upright (4) with a 3/8Ó x 2Ó Bolt (50) and a 3/8Ó Nylon Jam Nut (43).
40.Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82)in the direction shown. Attach the Pulley and two Pulley Covers (94) to the Leg Press Arm (9) with a 3/8Ó x 5Ó Bolt (74), a 3/8Ó Washer (38) and a 3/8Ó Nylon Locknut (42). Only thread the Locknut a cou- ple of turns onto the Bolt for now. It will be fully tightened in step 42. Orient the wide tab on the
Pulley Covers as shown.
38 |
|
| 38 | 76 |
|
|
| ||
|
| 94 |
|
|
|
|
| Crossbar |
|
88 |
|
|
|
|
42 | 38 |
|
|
|
| 12 | 82 | Wide Tab |
|
39 |
|
|
|
|
|
|
| 4 |
|
|
|
| 81 |
|
|
|
| 88 |
|
| 43 |
|
|
|
|
| 50 |
|
|
40 |
|
|
|
|
|
| 88 |
|
|
|
|
|
| 42 |
| 82 |
| 9 |
|
| 38 |
|
|
|
74 |
| 94 |
|
|
|
|
|
|
Wide Tab
41. Wrap the Press Cable (88) around a ÒVÓ Pulley (81) in | 41 | 83 | |
the direction shown. Attach the ÒVÓ Pulley and a | |||
| |||
| 65 | ||
Large Cable Trap (83) to the bracket on the Front |
| ||
Seat Frame (8) with a 3/8Ó x 2 1/2Ó Bolt (65) and a |
|
| |
3/8Ó Nylon Locknut (42). Be sure that the Large |
| 81 | |
Cable Trap is turned to hold the Cable in place |
|
| |
and that the Cable and Pulley move smoothly. |
|
| |
|
| 8 | |
|
| 88 | |
|
| 42 |
16
