31.Locate the Press Cable (88)Ñthis is the longest Cable. Attach the end of the Press Cable (88) to the Large ÒUÓ Bracket (84) with a 1/4Ó Nylon Locknut (44) and a 1/4Ó Washer (37). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable so only a couple of threads are showing above the Nylon Locknut, as shown in the inset drawing.
32.Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82)in the direction shown. Attach the Pulley and two Pulley Covers (94) to the indicated bracket on the Press Base (13) with a 3/8Ó x 2 1/4Ó Bolt (99), a 3/8Ó Washer (38) and a 3/8Ó Nylon Locknut (42). Orient the wide tab on the Pulley Covers as shown.
33.Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82)in the direction shown. Attach the Pulley and two Pulley Covers (94) to the other bracket on the Press Base (13) with a 3/8Ó x 2 1/4Ó Bolt (99), a 3/8Ó Washer
(38)and a 3/8Ó Nylon Locknut (42). Orient the wide tab on the Pulley Covers as shown.
31 |
|
|
|
|
| 44 |
|
|
| 37 | 84 |
| 44 |
| |
|
|
| |
| 37 | 88 |
|
|
|
| |
88 | 84 |
|
|
|
|
| |
32 |
|
|
|
|
| 88 |
|
|
| 94 |
|
|
| 82 | 42 |
|
| 94 | |
|
| 38 | |
|
|
| |
| 99 | Wide Tab | 13 |
|
| ||
|
|
| |
33 |
| 88 |
|
|
|
| |
|
| 94 38 | 42 |
| 94 | 82 |
|
| 99 |
| 13 |
|
|
|
Wide Tab
14
