34.Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82)in the direction shown. Attach the Pulley and two Pulley Covers (94) to the lower set of holes in the Pulley Plates (31) with a 3/8Ó x 2 1/4Ó Bolt (99) and a 3/8Ó Nylon Locknut (42). Orient the wide tab on the
Pulley Covers as shown.
35.Route the Press Cable (88) around a 3 1/2Ó Pulley
(82)in the direction shown. Attach the Pulley and two Pulley Covers (94) to the Leg Press Upright (4) with a 3/8Ó x 3 3/4Ó Bolt (76), two 3/8Ó Washers (38) and a 3/8Ó Nylon Jamnut (43). Orient the wide tab on the
Pulley Covers as shown.
34 |
|
|
|
|
|
| 31 |
42 |
|
| 99 |
|
|
| |
|
|
| 94 |
94 |
|
|
|
| 88 |
| 82 |
|
|
| |
|
| Wide Tab | |
35 |
|
|
|
|
| 4 |
|
|
| 38 | 43 |
|
|
| |
94 |
|
| 88 |
82 |
|
| |
|
|
| |
94 |
|
|
|
76 | 38 | Wide Tab |
|
36.Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82)in the direction shown. Attach the Pulley and two Pulley Covers (94) to the indicated hole in the Press Frame (12) with a 3/8Ó x 3 3/4Ó Bolt (76), two 3/8Ó Washers (38) and a 3/8Ó Nylon Locknut (42). Orient the wide tab on the Pulley Covers as shown.
37.Wrap the Press Cable (88) around a ÒVÓ Pulley (81). Attach the ÒVÓ Pulley to the upper bracket on the Leg Press Upright (4) with a 3/8Ó x 2Ó Bolt (50) and a 3/8Ó Nylon Jam Nut (43).
15
36 | 94 | 42 |
|
| 38 |
|
| 82 |
|
| 88 |
| 76 |
|
| 38 |
|
| 12 |
|
37 | 50 |
|
|
| |
|
| 81 |
| 4 |
|
|
| 88 |
| 43 |
|
