57.Insert a 1/4Ó x 2Ó Carriage Bolt (61) through the cen- ter hole in a Seat Plate (41). Attach the Seat Plate to the Seat (17) with two 1/4Ó x 1/2Ó Screws (59).
Insert the 1/4Ó x 2Ó Carriage Bolt (61) through the indi- cated hole in the Rear Seat Frame (16). Tighten a 1/4Ó Nylon Locknut (44) with a 1/4Ó Washer (37) onto the Carriage Bolt.
Attach the other end of the Seat (17) to the Rear Seat Frame (16) with a 1/4Ó Washer (37) and a 1/4Ó x 2Ó Machine Screw (63).
58.Press two 3/4Ó Round Inner Caps (78) into each Pad Tube (28).
Insert a Pad Tube (28) into the Rear Seat Frame (16). Slide a Foam Pad (29) onto each end of the Pad Tube.
Insert the other Pad Tube (28) into the Leg Lever
(15).Slide a Foam Pad (29) onto each end of the Pad Tube.
59.Attach the Large Backrest (19) to the Leg Press Upright (4) with two 1/4Ó x 2 1/2Ó Machine Screws
(64)and two 1/4Ó Washers (37).
60.Insert a 1/4Ó x 2 1/2Ó Carriage Bolt (60) through the center hole in a Seat Plate (41). Attach the Seat Plate to the Seat (17) with two 1/4Ó x 1/2Ó Screws (59).
Insert the 1/4Ó x 2 1/2Ó Carriage Bolt (60) through the indicated hole in the Front Seat Frame (8). Tighten a 1/4Ó Nylon Locknut (44) with a 1/4Ó Washer (37) onto the Carriage Bolt.
Attach the other end of the Seat (17) to the Front Seat Frame (8) with a 1/4Ó Washer (37) and a 1/4Ó x 2 1/2Ó Machine Screw (64).
57 | 17 |
|
|
| |
61 | 41 |
|
|
| |
59 |
|
|
| 37 | 63 |
16 |
| |
|
| |
| 44 |
|
58 | 16 |
|
|
| |
78 |
|
|
29 |
|
|
| 28 |
|
15 |
| 29 |
|
| 78 |
59 | 4 |
|
64 |
| 19 |
37 |
| |
60 |
|
|
|
| 17 |
| 8 | 60 |
| 41 | |
|
| |
|
| 59 |
| 37 |
|
| 64 |
|
|
| 44 |
21
