Manual • Installation •
C
Figure 23
GOLD Plus 30/40/60/80
Plus 40/60/80
PLUS 100/110/119
•Zoning with zone valves
•Place pumps at beginnings of zones. Placing them at the ends of zones could result in heating idle zones.
•Size manifold piping for total flow of all zone pumps.
Wiring options:
•Figure 34, page 52 — WMZV zone valve controller, priority optional (priority valve not required)
•Figure 40, page 58 or Figure 41, page 59 — Priority using
•Figure 37, page 55 or Figure 38, page 56 — Priority with
•Figure 35, page 53 or Figure 36, page 54 — No priority, using
Notes | 1. | This drawing is conceptual only. It shows representative piping components and layout. |
|
| |
|
| building codes. The installer is responsible for inclusion of all required safety devices, or |
|
| other miscellaneous piping hardware not shown on drawing. The installer is responsible |
|
| for proper sizing/selection of all hardware shown on this diagram. |
| 2. | See |
Part Number | 39 |