Weil-McLain PLUS-E017-A/1206 manual C Boiler-sidepiping except Gas continued, tions

PLUS LINE  Indirect-Fired Water Heaters – Series 3

C Boiler-side piping (except Gas)  continued

Figure 24

Dedicated single boiler with single water heater

In residential application (typically

GOLD Plus 30/40/60/80 or

Plus 40/60/80).

•Locate flow/check valve as close as possible to water heater boiler side connections — to reduce heat loss between cycles.

Notes	1.	These drawings are conceptual only. They show representative piping components and
		layout. Weil-McLain does not represent that the drawings meet any particular mechanical
		or building codes. The installer is responsible for inclusion of all required safety devices, or
		other miscellaneous piping hardware not shown on drawings. The installer is responsible
		for proper sizing/selection of all hardware shown on this diagram.
	2.	See Weil-McLain installation instructions for specific details on installing the boiler.
	3.	Recommended piping for PLUS 100/110/119 water heaters used in residential applica-
		tions.

40 Part Number PLUS-E017-A/1206