Wells WFGA-60FS USING THE OIL WAND - WASH OUT FRYPOT or DISCARD OIL, Danger, Burn Hazard

OPERATION - OPTIONAL FILTER WAND (continued)

DANGER:

BURN HAZARD

Contact with hot oil will cause severe burns.

Always wear protective clothing and heat resistant gloves when using the oil wand.

IMPORTANT:

Be sure the wand is properly installed, and that the discharge nozzle of the oil wand is directed either into the frypot, or into a suitable hot oil disposal container, before pressing the FRYER-OFF- FILTER switch to the FILTER position.

CAUTION:

BURN HAZARD

Contact with hot oil may cause burns. DO NOT fill fryer beyond MAX OIL line on frypot.

For disposal of oil, use only a container specifically designed for the disposal of hot oil.

DO NOT fill hot oil disposal container beyond MAX OIL line.

NOTE:

If the discharge from the nozzle is not a steady stream, the filter is clogged with breading and/or filter powder:

a.Close the frypot drain valve by turning the drain valve handle to the up position. When all oil is returned to the frypot press the FRYER-OFF-FILTER switch to OFF.

b.Allow the filter reservoir to cool. Refer to the Operation Manual for instructions on cleaning the filter and filter reservoir.

USING THE OIL WAND - WASH OUT FRYPOT or DISCARD OIL

1.If discarding oil, be sure a suitable hot oil disposal container is available. Otherwise, prepare the filter reservoir pan for filtering.

2.Turn the DRAIN VALVE HANDLE down to open the drain and fill the filter reservoir.

3.Insert the wand fitting into the fryer fitting:

a.Slide the locking ring of the wand fitting fully toward the hose.

b.Insert the wand fitting fully into the fryer fitting.

c.Allow the locking ring to spring forward.

d.Check to verify that the wand fitting is held securely by pulling on the hose.

4.Turn the 3-WAY VALVE HANDLE clockwise to the front-to-rearposition to direct the pump output to the oil wand.

5.Direct the discharge nozzle of the oil wand into the frypot, or into a suitable hot oil disposal container. DO NOT fill beyond the MAX OIL line.

6.Press the FRYER-OFF-FILTER switch to the FILTER position.

7.Wand may be used to wash down the sides of the frypot during filtering, or to pump oil into a container for disposal.

8.At conclusion of use, press the FRYER-OFF-FILTER switch to the OFF position, disconnect wand from fryer fitting and return the handle of the 3-way valve to the left-rightposition.

9.Drain any remaining oil in the wand by pointing the discharge nozzle of the wand down into the frypot or disposal container.

371 301098 OpManual for WFGA-60FS Gas Fryer

20