CLEANING INSTRUCTIONS (continued)
PREPARATION
Disconnect appliance from electric power
Allow to cool before cleaning
FREQUENCY Weekly
TOOLS
Warm water and a mild detergent
Soft clean cloth or sponge
Bristle brush
ROLL WARMER SECTION
1.Disconnect appliance from electric power Allow to cool before cleaning
2.Remove roll warmer drawers, drawer inserts and Humitrol racks.
3.Brush crumbs from drawer slides and interior of warmer cavity with a bristle brush.
4.Wash and rinse the drawer inserts and Humitrol racks in a sink or dishwasher using mild detergent and warm water. Allow to air dry.
5.Reassemble and reinstall warmer drawers.
Procedure is complete
DANGER |
ELECTRIC SHOCK HAZARD |
DO NOT SPRAY WATER ON OR AROUND |
ELECTRICAL EQUIPMENT |
DO NOT WASH FLOOR NEAR ELECTRICAL |
EQUIPMENT WITH WATER SPRAY |
CAUTION:
ELECTRIC SHOCK
HAZARD
Disconnect appliance from electric power before cleaning.
CAUTION:
HOT SURFACE
Exposed surfaces can be hot to the touch
and may cause burns. Allow appliance to cool before cleaning.
IMPORTANT:
DO NOT spill or pour water into controls, control panel, wiring. Damage to internal components will occur.
Damage to internal components from water damage is not covered by warranty.
IMPORTANT:
DO NOT use steel wool or metal implements to clean drawers or cabinet surfaces.
21
