Troubleshooting Procedures
Due to possibility of personal injury or property damage, always contact an authorized technician for servicing or repair of this unit.
!
CAUTION
All safety information must be followed as provided in the Service Manual.
!WARNING
To avoid risk of electrical shock, personal injury or death, disconnect power to unit before servicing.
EXIT SERVICE MODE
Rotate Cycle Selection Knob to “Power Off” and press
knob.
or
Allow 5 minutes of inactivity.
or
Disconnect power
DISPLAY/CLEAR SERVICE CODES
CONSOLE SWITCH TEST
Enter Service Mode then set Cycle Selection Knob to
“Rinse & Spin”. Press knob
•Rinse & Spin LED will blink if codes other than power interrupt are present.
•Press knob to view codes. Press once for each code. Codes are displayed newest to oldest. Machine beeps three times after last service code is displayed.
•To clear codes display a code then press and hold Cycle Selection Knob until machine beeps twice. Rinse & Spin LED stops blinking.
•Refer to chart for Service Codes.
Enter Service Mode then set Cycle
Selection Knob to “Delicate” and press
knob.
• Power Off LED blinks.
•Pause and Delicates LED’s are
illuminated.
Rotate the Cycle Selection Knob clockwise for ascending, and counterclockwise for decending test mode. Rotate 32 clicks in the same direction to complete the test.
|
|
| 11 |
©2005 Maytag Services | 16026502 | ||
