Disassembly Procedures
!WARNING
To avoid risk of electrical shock, personal injury or death, disconnect power to unit before servicing.
8.Remove Pressure Switch Hose and wiring connector from Pressure Switch.
NOTE: There will be water remaining in the hose from the last cycle.
9. Lift Pressure Switch locking tab and rotate switch to |
| |
remove. | 4. Remove Belt. | |
10.Remove Facia from Console. | ||
|
Drain Pump/Belt Removal
1.Disconnect power supply to unit.
2.Remove back Cover.
3.Remove Drain Hose Clamps.
NOTE: There will be water remaining in the hose from the last cycle.
5. Remove three screws retaining Drain Pump.
©2005 Maytag Services | 16026502 | 19 |
