WASH/RINSE | LOAD TYPE |
TEMPS |
|
These settings feature Automatic
Temperature Control:
ATC Warm/Warm | Saves energy by adding cold water | |
to the hot water from your water | ||
ATC Warm/Cold | heater. Provides optimum cleaning | |
at lower temperatures. | ||
| ||
| May add hot water to the incoming | |
ATC Cold/Cold | cold water as the washer fills. This | |
assures that the water will be warm | ||
| ||
| enough to properly activate detergent. |
Note: In wash water temperatures below 60° F, detergents do not dissolve well or clean well.
STEP 5
Select Cycle
To select a cycle, push the control dial in and turn it to the right (clockwise) until the pointer is at the number of minutes desired for the wash load.
IMPORTANT: For optimum fabric care, the appropriate wash and spin speed for the load type must be selected using the Wash/Spin Speed knob.
Regular/Delicates Cycle
Regular/Delicates cycles share the same portion of the control dial. For regular fabrics, select the cycle and turn the Wash/Spin Speed dial to Normal/Normal. For delicate loads, select Slow/Slow.
Wrinkle-Free Clothes Cycle
This cycle provides up to 12 minutes of agitation. Depending on the load, select either the Normal/Slow or Slow/Slow wash/spin speed.
Stain Cleaner Cycle
Stain Cleaner provides approximately 30 minutes of agitation and soaking to help remove stubborn dirt and stains. For more information see page 8.
STEP 6
Select Extra Rinse (if desired)
When the switch is in the On position, an additional rinse at the end of the Regular/Delicates cycle is provided to more completely remove laundry additives, suds, perfumes, etc.
STEP 7
Pull Control Dial Out to Start
You may stop the washer at any time by simply pushing the control dial in. Therefore it is possible to obtain a
Note: Do not attempt to turn the control dial counterclockwise. Damage to the timer will result.
6
©2005 Maytag Services | 16026502 |
