Disassembly Procedures
!WARNING
To avoid risk of electrical shock, personal injury or death, disconnect power to unit before servicing.
Tub Top Removal
1.Disconnect power supply to unit.
2.Lift Top Cover, see “Top Cover Removal” procedure.
3.Press down on Tub Top and swing locking latch away from Outer Tub. Repeat for all latches
4.Remove Tub Top.
6.Remove screw located in the center of the Agitator/ Auger assembly.
7. Remove Agitator Auger from Agitator Base.
Agitator/Spinner/Outer Tub/Transmission
Removal
1.Disconnect power supply to unit.
2.Remove Drain Pump hoses and Belt, see “Drain Pump/Belt Removal” procedure steps 1 - 4.
3.Lift Top Cover, see “Top Cover Removal” procedure.
4.Remove Tub Top, see “Tub Top Removal” procedure.
5.Unsnap Fabric Softener Dispenser from Agitator.
8. Lift Agitator Base from Washer.
©2005 Maytag Services | 16026502 | 23 |
