Troubleshooting Procedures
Due to possibility of personal injury or property damage, always contact an authorized technician for servicing or repair of this unit.
!
CAUTION
All safety information must be followed as provided in the Service Manual.
!WARNING
To avoid risk of electrical shock, personal injury or death, disconnect power to unit before servicing.
ENTER SERVICE MODE
| Rotate the Cycle Selector Knob to the “Power Off” |
|
| position and press knob. |
|
| (All LED’s will be off). |
|
| Rotate the Cycle Selector Knob clockwise past |
|
| “Power Off” twice and stop at “Regular”. |
|
| (LED’s will illuminate as the knob is rotated). |
|
| Rotate the Cycle Selector Knob counterclockwise |
|
| one revolution back to “Regular” and press knob. |
|
| • Power Off, Rinse & Spin LED will blink (if error |
|
| codes are present). Regular LED will be |
|
| illuminated. |
|
| • Model I.D. is displayed by the LED’s around the |
|
| bottom of the dial. |
|
| • Model I.D. can be redisplayed while in Service |
|
| Mode by setting knob to “Handwash” and |
|
| pressing. |
|
| • Refer to chart for Model I.D. |
|
10 | 16026502 | ©2005 Maytag Services |
