To Remove:

1.Open the oven door. Insert door removal pins, included with your range, into both hinge hangers. Do not remove the pins while the door is removed from the range.

4.Insert the door stop clip with its angular surface at the top of the frame hinge slot, then push in the bottom of the clip until its flanges are flush with the front frame.

A

B

A. Removal pins

B. Hinge hanger

2.Slowly close the door until it rests against the door removal pins.

3.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.

4.Pull door straight up, then toward you. Hinge hangers will slide out of front frame hinge slot. Do not remove door removal pins until the door is replaced on the range.

5.Open the door completely and remove the door removal pins. Save door removal pins for future use.

6.Close the door.

Storage Drawer

The storage drawer can be removed. Before removing, make sure drawer is cool and empty.

To Remove:

1.Pull the storage drawer straight back past the drawer stop notch and the end of the side rails.

To Replace:

1.Grasp the door on the sides with your fingers on the front of the door and your thumbs on its inside surface.

2.Hold oven door so that the top edge of each hinge hanger is horizontal. Insert hinge hangers into the front frame hinge slots.

3.Tilt top of door toward range. Slide hinge hangers down onto front frame support pins. Make sure the hinge hangers are fully seated and engaged on the support pins.

A C

B

A. Hinge hanger

B. Door frame hinge

C. Support pins

A B

A. Drawer stop notch

B. End of side rail

2.Lift up the back of the drawer and pull the drawer out.

To Replace:

1.Lift up the back of the drawer and place it inside the range in its fully forward position.

2.Lift up the front of the drawer to a level position.

3.Slowly push the drawer into the range until the drawer side rails engage with the gap in the drawer glides.

A

A. Engage drawer glide

4.Once the drawer is fully engaged on both sides, slide the drawer back into the closed position.

NOTE: When you are removing and replacing the storage drawer, a slight push may be needed to move the drawer stop notch past the drawer glides.

25

Page 24 Page 26
Page 25
Image 25
Whirlpool GERC4110PB2 manual Storage Drawer, To Remove
Page 24 Page 26

GERC4110PB2 specifications

The Whirlpool GERC4110PB2 is a sleek and efficient refrigerator designed to meet the needs of modern households. This model stands out with its spacious interior, advanced cooling technologies, and user-friendly features that enhance convenience and food preservation.

One of the key features of the GERC4110PB2 is its generous storage capacity. With adjustable shelving and door bins, it provides ample space for groceries of all sizes. The crisper drawers are specifically designed to maintain optimal humidity levels, ensuring that fruits and vegetables stay fresher for longer. The sleek design of the refrigerator also includes an easy-to-clean interior that helps maintain hygiene and visibility.

The refrigerator incorporates Whirlpool's advanced cooling technology which efficiently maintains a consistent temperature throughout the unit. This feature prevents temperature fluctuations that can lead to food spoilage. Additionally, the model is equipped with a Frost-Free cooling system that minimizes ice buildup, reducing the need for manual defrosting and making it easier to maintain.

Energy efficiency is another highlight of the GERC4110PB2. This refrigerator is designed to consume less energy than traditional models, which can lead to lower utility bills and a reduced environmental footprint. It is compliant with Energy Star standards, making it a smart choice for energy-conscious consumers.

Further enhancing the user experience, the GERC4110PB2 includes an innovative temperature management system. This system allows users to monitor and adjust the internal temperature easily, ensuring that food is stored at ideal conditions. The refrigerator also features quiet operation technology, which reduces noise levels, making it suitable for open-plan living spaces.

In terms of design, the Whirlpool GERC4110PB2 features a contemporary look with a sleek black finish, seamlessly blending with various kitchen decors. The ergonomic handles provide easy access, while the reversible doors offer flexibility in placement.

In conclusion, the Whirlpool GERC4110PB2 is a well-rounded refrigerator that combines style, functionality, and energy efficiency. With its spacious interior, advanced cooling technologies, and user-friendly features, it is an ideal choice for families looking to enhance their kitchen experience while ensuring the longevity of their food supplies.
Top Page Image Contents