Usingthe MinuteTimer

The microwave oven controls can be used as a minute timer. Use COOK 1 at “0”Cook Power for timing up to 99 minutes, 99 seconds.

NOTE: The oven will not operate while the Minute Timer is in use.

1.Touch COOK 1. The COOK 1 Indicator will come on and the Display will show “0O:OO”.

2.Touch Number Pads for the minutes and seconds you want. The Display will show the numbers you touched in the order you touched them. This example shows 1 minute, 45 seconds.

3.Touch COOK POWER. The COOK POWER Indicator will come on and the Display will show “P-HI”.

4.Touch the “0”Number Pad. The Display will show “P-O”.This tells you the oven will be operating at 0% power.

5.Touch START.

NOTE: If you hear the fan start when you touch START, you have not set the Cook Power properly. Touch CANCEL and start over.

The COOK 1 and COOK POWER Indicators will stay on to show you that the timer is running.

The Display counts down to show you how much time is left. During the countdown the oven will be dark and the fan will be off.

When the set time ends, “End”will show on the Display and 4 tones will sound. (You can stop the tones by opening the door or by touching CANCEL.) “End”will remain on the Display and a reminder tone will sound every 30 seconds (to remind you that the Minute Timer has ended) until the door is opened or CANCEL is touched. The Display will then show the time of day.

NOTE: Opening the oven door stops the countdown. Close the door and touch START to continue the timing countdown.

27

Page 27
Image 27
Whirlpool MT21OOCY user manual Usingthe MinuteTimer