Using Your Microwave Oven
Contmued
Settingthe clock
When the oven is first plugged in, a tone sounds and the Display shows “88:88”. If the electric power ever goes off, the Display will again show “88:88” when the power comes back on.
You can cook without setting the clock, but the Display will be blank after cooking.
To set the clock, touch CLOCK SET. The Display will show “0”and the colon will flash.
NOTE: The first number Pad must be touched within 5 seconds or the Display will go blank. If the Display goes blank, touch CLOCK SET again and continue.
Touch Number Pads for the correct time of day. The Display will show what numbers you touched in the order you touched them. This example shows 25 minutes after 3 o’clock.
Touch START. The colon will stop flashing. The clock is set.
If you have touched in an incorrect time,
such as 12:65, “Err”will show on the Display. Touch CLOCK SET and start over.
NOTE: To m the clock, touch CLOCK SET. The current time will show on the Display and the colon will disappear. Continue to set the clock as shown above.
UsingCANCEL
Touch CANCEL to:
l Erase instructions if you make a mistake during programming.
l
l
Cancel the Minute Timer.
Stop the oven temporarily during cooking.
NOTE: The oven may also be stopped during a cycle by opening the door. Close the door and touch START to continue cooking.
12
