UsingYourMicrowaveOven
Microwaveovencontrols
There are three parts in the control section: - Display/Clock and Indicators
Instructions for each control are covered on the following pages. Read them carefully.
When you first plug in the oven, a tone will sound and the Display will show “88:88”. Set the clock to the correct time of day (page 12). If your electricity goes off for a while and comes back on, the clock will return to “88:88”. Reset the clock.
Display/clock and indicators
When you are not using the microwave oven, this is an accurate clock.
When you are using the microwave oven, it displays time settings, cook power settings and indicators.
Command pads
l
l
l
Touch Command Pads to tell the microwave oven what to do and in what order. A few examples:
-CLOCK SET tells the oven you are going to set the clock.
-START tells the oven to start. (See page 11 for information on the tone you hear when touching any pad.)
Each Command Pad (except START, CANCEL, and CLOCK SET) causes an Indicator to light when you touch the Command Pad. While the oven is running, an Indicator (or Indicators) will be on to show what the oven is doing.
If you touch two instructions into the same cycle, the second set of instructions will cancel the first.
Number pads
Once you’ve touched a Command Pad to tell the oven what you want it to do, you’ll touch Number Pads to tell it
10
