Using Your Range
Continued
Locking screw
r To raise
Tooth’-Notches
Adjusting the oven temperature control
Does either oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without you noticing the change. Your new ovens are properly adjusted to provide accurate temperatures. But, when compared to your old oven, the new design may give you different results.
If, after using the ovens for a period of time, you are not satisfied with the temperature settings, they can be adjusted by following these steps:
1.For the oven you want to adjust, turn the Oven Temperature Control Knob to the off position. Pull knob straight off.
2.Loosen the locking screw. Note the position of the notches.
3.To lower the temperature, move a notch closer to LO. Each notch equals about 10°F
4.To raise the temperature, move a notch closer to HI. Each notch equals about 10°F (5°C).
Tighten the locking screw and replace the control knob.
10
