CaringForYourRange
Burn and Electrical Shock Hazard
Make sure all controls are off and the range is cool before cleaning. Failure to do so can result in burns or electrical shock.
Control panel and knobs
1. Turn control knobs to the OFF position.
2. Pull control knobs straight off.
3. Use warm soapy water or spray glass cleaner and a soft cloth to wipe the control panel. Rinse and wipe dry with a soft cloth.
4. Wash control knobs in warm soapy water. Rinse well and dry with a soft cloth. Do not soak.
5. Replace control knobs by pushing them firmly into place.
NOTE: When cleaning, never use steel wool, abrasives, or commercial oven cleaners which may damage the finish. After cleaning, make sure all control knobs point to the OFF position.
Surface units and reflector bowls
Removing
Burn and Electrical Shock Hazard
Make sure all surface units are OFF before removing surface units and reflector bowls. Failure to do so can result in burns or electrical shock.
1. Lift the edge of the unit opposite the receptacle, just enough to clear the reflector bowl and trim ring.
2. Pull the surface unit straight away from the receptacle.
17
