3.When the terminal is pushed into the receptacle as far as it will go, push down the edge of the surface unit opposite the receptacle.
Reflector bowls reflect heat back to the utensils on the surface units. They also help catch spills. When they are kept clean, they reflect heat better and look new longer.
If a trim ring gets discolored, some of the utensils may not be flat enough, or some may be too large for the surface unit. In either case, some of the heat that’s meant to go into or around a utensil goes down and heats the trim ring. This extra heat can discolor it. See Cooking Guide for further information.
Lift-up cooktop
1.Lift front of cooktop at the center and swing the support rod up.
2.Carefully lower the cooktop onto the support rod. Be sure the tip of the rod fits in the notch in the cooktop.
Personal Injury and Product Damage Hazard
Be sure the rod fits in the notch in the cooktop and is held securely. The cooktop could accidentally fall and injure you. Do not drop the cooktop. Damage can result to the porcelain and the cooktop frame.
3.Wipe surface under the cooktop with warm soapy water. Use a
