USING YOUR RANGE

After the countdown is over, 3 short tones will sound, followed by one tone that sounds every 6 seconds until you press any other command pad.

To cancel the Minute Timer:

Press Timer On/Off pad for about 4 seconds until TIMER stops flashing on the display.

TIMER ON/OFF

Using the off/cancel pad

The Off/Cancel pad will cancel any function except for the Timer function. When you press the Off/Cancel pad, the display will show the time of day or, if Minute Timer is also being used, the time remaining.

OFF

CANCEL

Audible signals

Audible signals tell you if a function is entered correctly or not. They also tell you when a cycle is completed.

To shut off repeating end of timer countdown signal:

1.Press and hold the Off/Cancel pad for 10 seconds.

2.A short tone will sound to tell you the signal has been changed.

Repeat Steps 1 and 2 above to turn the signal back on.

11

Page 11
Image 11
Whirlpool SS385PEE important safety instructions Using the off/cancel pad, Audible signals, To cancel the Minute Timer