Using Your Range, Using the surface burners

Using Your Range

Using the surface burners

Your range is equipped with electric ignitors.
Electric ignitors automatically light the
burners each time they are used.
Push in control knob and turn counter-
clockwise to the LITE position. The clicking
sound is the ignitor sparking. Visually
check that burner has lit.
To stop the clicking sound after the
burner lights, turn the control knob to the	Push in and turn counterclockwise
desired cook setting. The control knob has	Push in and turn counterclockwise
stops for HI, MED, and LOW. However, you
can set the control knob anywhere between
HI and OFF.

Surface burner markers

The solid dot in the surface burner marker shows which surface burner is turned on by that knob.

wWARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death or fire.

Page 6

Image 6

Whirlpool SS385PEE important safety instructions Using Your Range, Using the surface burners, Surface burner markers

Contents

UseAndCare Part no C4020P030-2/4389869 Rev. a What to do if YOU Smell GAS Important Safety Instructions Your safety and the safety of others is very important Important Safety Instructions Parts and Features Control panel Surface burner markers Using Your RangeUsing the surface burners Push in control knob and turn counter Burner heat settings Cookware tips Case of a prolonged power failureHome canning information Positioning racks and pans Electronic oven control Command padsFor best air circulation Display/clock Setting the clock Using the electronic Minute Timer To cancel the Minute Timer Using the off/cancel padAudible signals To shut off repeating end of timer countdown signal Baking/roasting Adjusting the oven temperature control Broiling Rack Position From Bottom Food Broiling rack position chartBroiling tips Rare steaks and fish Using the electronic Mealtimer control Energy saving tips To start baking/roasting now and stop automatically Cook Time To delay start and stop automatically Stop Time To cancel the Mealtimer control Setting Oven vent Storage drawerRemoving the storage drawer Anti-tip chain To verify the anti-tip chain is engagedReplacing the storage drawer Using the Self-Cleaning Cycle Before you start Setting the controls To start the Self-Cleaning cycle nowTo delay the start Self-Cleaning cycle When the oven reaches normal baking/roasting temperatures When the oven locksWhen the Self-Cleaning cycle is completed To stop the Self-Cleaning cycle at any time Special tips How the cycle works Caring for Your Range Surface burner grates and reflector pansLift-up cooktop To remove burners To clean burnersSurface burners To replace burners Removing the oven bottom To removeTo replace Cleaning chart Part What to USE HOW to Clean Grates Do not clean in Self-Cleaning cycleSurface burner Reflector pans Oven door glass Oven lightTo replace the oven light Oven cavity If You Need Assistance or Service Problem Possible Cause SolutionBefore calling for assistance … Not turn Self-Cleaning Yellow, or are Noisy when Turned off Burner makesPopping noise When on Control Lift off ports, are If you need FSP replacement parts … If you need service …If you need assistance … Page Warranty Gas Range WarrantyLength of Warranty Whirlpool will PAY for Full ONE-YEAR Whirlpool will not PAY for

Whirlpool SS385PEE Using Your Range, Using the surface burners, Surface burner markers

Models: SS385PEE

Using Your Range

Using the surface burners

Push in control knob and turn counter-

check that burner has lit.

To stop the clicking sound after the

Surface burner markers