When your DVDRX160 is turned on, the system will start in Tuner mode. The timeshift buffer will start recording. If the timeshift buffer mode is set to refresh (See System Setup) and you change channels, the timeshift buffer will be lost. No message will be provided prior to doing so. However if the timeshift buffer is set to “PRESERVE” the time shifting buffer will be maintained.
Note: If you change the input source and the video standard is different (NTSC vs PAL), the timeshifting buffer will be erased.
During timeshifting, a Timer recording
SAVE
In order to save part or all of the timeshifting buffer, two options are available:
1.Save Option 1
While viewing a program using timeshift, press REC, this will mark the start of the segment to be recorded.
You can navigate forward and back using the “transport” keys. By pressing REC, you will increase the length of the program you are saving by 30 minutes, up to a mmaximum of 3 hours. Press stop to indicate the end of the segment to record. The save part of the timeshifting buffer will be tagged in RED.
2.Save Option 2
While viewing a program, press Rec and hold down for 3 seconds. This will save the entire Time shifting buffer. If Stop is pressed, the save will terminate at that point in the buffer. Press Stop and hold for 3 seconds if you want to cancel the save operation.
Note: You cannot change the channel or source while in the process of saving (the end of the recording segment is either not entered, or in case of a long recording, it has not been reached). Saving has to be manually stopped first (by pressing STOP ). The segment will be Saved on HDD and then channel or source change can be performed.
Note: Only one segment in the Time shifting buffer can be identified for Saving. It is not possible to identify multiple segments. Once the segment has been Saved and registered on the Title list, this segment will be removed from the Time shifting buffer.
30
