LPCM OUTPUT

The unit can set LPCM96K and LPCM 48K as the audio sampling frequency.

NOTE: See your amplifier manual if unsure.

Set Up Menu - Language

SYSTEM LANGUAGE

To satisfy the needs of consumers in different countries, the unit provides various menu language settings.

1. Enter the system setup mode.

2. In the System Setup control bar menu, use the or button to move the cursor, select the Language item, and press the SELECT button to enter the Language Settings menu, which contains four items, as shown in the chart.

3. In the Language Setting menu, use the or button to select the Language option and press the SELECT button to drop down a menu.

Note: Adjusting the system language changes the language used in all the menus. Careful! Do not set to languages you cannot understand.

AUDIO LANGUAGE

Use the or button to select the language you want and press the Select button.

If you play DVD disc supporting the selected language, the system will adopt that language as the DVD audio language.

If the disc doesn’t support the selected language, the system will adopt the language provided by disc.

SUBTITLE LANGUAGE

Some DVD discs may contain various subtitle languages. Adjusting this will determine the default subtitle language.

Use the or button to select the language you want and press the SELECT button

Off means no subtitle output.

The system will give priority to this setting as the DVD subtitle language. If the DVD played does not support the selected language the DVD default will be displayed.

You can change the subtitle language at any time during playback by pressing the subtitle button on the remote.

37

Page 38
Image 38
Wintal DVDRX160 manual Set Up Menu Language, Lpcm Output, System Language, Audio Language, Subtitle Language