Wintal DVDRX160 manual Record Quality, APS Auto Program Scan, Modify Channel

Record Quality

1.In the Recording Settings menu, use the ▲ or ▼ buttons to select the Default Quality of recordings and press the SELECT button to drop down a menu.

2.Use the ▲ or ▼ buttons to select a desired value and press the SELECT button.

3.Press the RETURN button to return to the upper level menu and set up other options.

Note: For the differences of the six quality levels; HQ, SP, SP+, LP, EP, and SLP, see RECORDING MODES for reference.

1

APS (Auto Program Scan)

Your DVDRX160 has a built-in TV tuner. You can receive TV signals directly from the unit, but first, you must conduct a channel scan to tune in various channels automatically and determine their frequencies. The tuned channels will be saved automatically. Even if the power is off, the saved channel information will not be lost. Press the SETUP button to enter the System Setup mode.

Use ▲ or ▼ buttons, highlight APS, select it, and the following menu will be displayed.

■Select the OK button, then the tuner will start searching through various channel frequencies and add available channels to the system memory. This procedure may take several minutes.

■When the scan is complete ‘TOTAL CHANNELS FOUND’ will appear on the screen with the number of channels that have been stored to memory. Press the SETUP button on the remote control to exit.

Modify Channel

33