Woodstock W1820, W1819 manual jkIle, Kfk\jkilek\dXZ`e\#fk\j\jk\gj1

Df[\cN(/(0&N(/)'D]^%J`eZ\('&('

K\jkIle

J<KLG

Once the assembly is complete, test run the machine to make sure it runs properly for regular operations. The test run consists of verifying the following: 1) The motor powers up and runs correctly, and 2) the safety disabling mechanism on the switch works correctly.

If, during the test run, you cannot easily locate the source of an unusual noise or vibration, stop using the machine immediately, then review KiflYc\j_ffk`e^ on GX^\...

If you still cannot remedy a problem, contact our Tech Support at (360) 734-3482 for assistance.

Kfk\jkilek_\dXZ_`e\#[fk_\j\jk\gj1

(% Make sure you have read the safety instructions at the beginning of the manual and that the machine is fully assembled and set up properly.

)% Make sure all tools and objects used during setup are cleared away from the machine.

*% Connect the machine to the power source.

+% Verify that the machine is operating correctly by turning the machine FE.

—When operating correctly, the machine runs smoothly with little or no vibration or rubbing noises.

—Investigate and correct strange or unusual noises or vibrations before operating the machine further. Always disconnect the machine from power when investigating or correcting potential problems.

,% Turn the machine F==.

-%Insert the switch disabling pin through the green ON button, as shown in =`^li\*+.

.% Press the green ON button to test the disabling feature on the switch.

—If the machine does not start, the switch disabling feature is working as designed.

—If the machine starts, immediately stop the machine. The switch disabling feature is not working correctly. This safety feature must work properly before proceeding with regular operations. Call Tech Support for help.

Gifa\Zk`c\j k_ifne ]ifd k_\ dXZ_`e\ Zflc[ ZXlj\ j\i`flj \p\ `ealip% N\Xi jX]\kp ^cXjj\j kf i\[lZ\ k_\ i`jb f] `ealip%

Pin

=`^li\*+% Switch disabling pin inserted

into ON button.

-30-