BELKIN:
1.Login to the router.
2.Choose “Firewall”, select “Virtual Servers”
3.Input the port (don’t use 80) and IP address, then click save. NOTE: The port and IP address should be the same as the camera.
Figure 7.6
DLINK:
1.Login to the router.
2.Choose “Advanced”, select “Virtual Servers”
3.Input the port, IP address, Protocol, then click save.
NOTE: The “public port” & “private port” should be the same as camera’s port, choose the protocol to be “both”.
Figure 7.7
37
