Xantrex Technology 400 Plus, 400 R manual Overheating, Low Battery Protection

Introduction

Overheating

The XPower Powerpack is protected from overheating. If the inverter exceeds a safe temperature, power to the AC Outlet and DC Socket automatically shuts off. It will reset automatically after the unit cools down.

Low Battery Protection

Low battery protection protects the internal battery from excessive discharge and possible damage. When the AC Outlet ON/OFF switch is turned on, an audible alarm alerts you when the internal battery is nearly discharged (11.0Vdc) and the unit turns off at 10.5 Vdc.

CAUTION

When using only the DC Socket to power your loads, be sure to turn the AC Outlet ON/OFF switch to ON. This ensures that the Low Battery Alarm will sound and will alert you to a low battery condition. Failure to turn the AC Outlet ON/OFF Switch to ON when using the DC Socket can allow the unit to be over-discharged which can destroy the battery. Over-discharging the battery in this manner will void the unit’s warranty.

Jump-Start Cables Safety Fuse

The XPower Powerpack comes with a user-replaceable 250 A fuse to protect the unit and vehicle battery from damage through reverse polarity and short-circuit conditions.

1-2 975-0162-01-01