Maintenance

Battery Replacement Procedure

Before attempting to replace the internal battery, make sure you:

Disconnect any charging cables, 12 volt DC appliances, and AC appliances from the XPower Powerpack.

Turn off the AC Outlet ON/OFF switch and turn off the light switch.

Remove the jump-start cables.

Fasteners

Figure 4-1Accessing the Internal Battery for Replacement

To replace the battery:

1.Place the XPower Powerpack upright on a stable, level surface.

2.On the backside of the XPower Powerpack, unscrew the four fasteners on the battery cover. Place the fasteners in the cover for safe keeping.

3.Disconnect the wires on the battery only.

4-4

975-0162-01-01

Page 62
Image 62
Xantrex Technology 400 Plus, 400 R manual Battery Replacement Procedure, Fasteners