Xantrex Technology 400 Plus, 400 R Over-Temperature Safety Protection, To use a Nozzle Adapter

Operation

Ready to use

To use a Nozzle Adapter:

1.Put the thumb Latch in the OPEN position.

2.Insert the desired adapter into the valve connector.

3.Turn clockwise to tighten.

4.Put the Thumb Latch in the CLOSED

position.

5.Insert into the Valve Receptacle on the item to be inflated.

6.Inflate the desired item to the appropriate pressure.

7.Remove the Valve Connector from the valve receptacle.

8. Put the Thumb Latch in the OPEN position.

9. Remove the adapter.

10. Store in either the Accessory Bag or in the small compartment provided inside the storage compartment on the back of the unit.

Figure 3-14Nozzle Adapter Usage

Over-Temperature Safety Protection

The XPower Powerpack is equipped with an over-temperature safety protection feature that automatically turns the compressor off if it begins to exceed a safe operating temperature.

Once the compressor cools down to its normal operating temperature it will automatically turn on again and continue inflating.

3-24 975-0162-01-01