Xantrex Technology 400 Plus, 400 R Replacing the Incandescent Light, To replace a light bulb

Replacing the Incandescent Light

4.After removing the old battery, position the new battery close to the back of the XPower Powerpack.

Make sure the positive battery terminal is next to the red positive (+) internal cable and the black negative terminal is next to the black negative (–) internal cable.

5.Securely fasten the bolt and washer that holds the red positive (+) cable to the positive (+) battery terminal and the black negative (–) cable to the negative (–) battery terminal.

6.Do not overtighten the bolt. Consult the battery manufacturer for torque specifications.

7.On the XPower Powerpack, replace the battery cover and the four fasteners.

8.Dispose of the old battery in an environmentally responsible manner.

Replacing the Incandescent Light

To replace a light bulb:

1.Turn the light switch off.

2.Unscrew the cover and lens.

3.Gently grasp the bulb and pull to remove the light reflector assembly and the bulb.

4.While holding the light reflector assembly, gently unscrew the black knob at the back of the assembly.

5.Remove the old bulb and insert a replacement bulb of the same type and rating into the light reflector assembly. Replacement Lamp: Part # 030-9951-01 5 watt 12-v lamp.

6.Holding the light reflector assembly, gently screw the black knob on to the back of the assembly.

7.Reattach the lens and cover.

975-0162-01-01 4-5