Using the Air Compressor
Inflating Small Sports Equipment
You can use the compressor to inflate small sports equipment such as balls (soccer balls and footballs).
CAUTION
The XPower Powerpack cannot be used to inflate large capacity inflatables such as float tubes, large air mattresses, and inflatable boats. These types of products require extended inflating times which may damage the compressor.
To inflate small sports equipment:
1. Choose the appropriate nozzle adaptor (if required).
2. If an adapter is required, insert the nozzle adaptor into the valve connector, turning it clockwise to tighten, and close the thumb latch.
3. Place the valve connector fully on the valve stem or into the valve receptacle on the item to be inflated.
4.Turn the compressor ON and inflate to appropriate pressure.
5.Turn the compressor OFF before removing valve connector from the valve stem.
6.Remove nozzle adaptor from valve connector and store in storage compartment or Accessory Bag.
Figure 3-16 Inflating Small Sports Equipment
WARNING: Fire hazard
Allow the compressor to cool down for 10 minutes after each 10 minutes of continuous operation. Duplicate.
Note: Leave the thumb latch in the open position for storing to relieve pressure on the internal mechanism.