Recharging the XPower Powerpack Battery

1.Ensure the Emergency Light Switch is in the OFF position. (Center)

2.Ensure the AC Power Switch is in the OFF Position.

AC Charging Plug

35 hours charge time (assuming the battery has been fully discharged).

3.Insert the AC Charging plug into the Charger Input Socket inside the Storage Compartment on the back of the unit.

4.Insert the AC Charger into a standard 120 Vac outlet.

Control Panel

5.Check the Charging Status LED. It should be flashing.

Flashing LED = Charging Steady ON LED = Standby

Figure 3-2Charging with AC Power

975-0162-01-01

3-5

Page 31
Image 31
Xantrex Technology 400 Plus, 400 R manual 2Charging with AC Power