Xantrex Technology 806-1054, 806-1840, 806-1055-02, 806-1544 Error Code Condition Mode Action, 

Freedom HF InvChg Owners Guide.book Page 35 Tuesday, April 29, 2014 12:10 PM

Warning Messages

Warning messages in the form of audible alarms and error codes that appear on the display panel screen to alert you to an impending system change. Warnings do not affect operation.

With the exception of the error codes displayed on the screen, only the audible alarm can be turned ON or OFF. Follow the steps in “To adjust the alarm setting:” on page 13 to change the alarm settings.

The error codes are listed in Table 7 below. The text in the Error Code column appears on the display screen of the display panel.

Table 7 Error Codes Displayed on the Display Panel Screen

Error Code	Condition	Mode	Action
	Low battery voltage shutdown	Inverting	• Check battery status and recharge if necessary.
	is imminent depending on the		• Check for proper DC cable sizing.
	setting, see “Operating Limits”		• Check for loose connections and tighten if necessary.
	on page 22.
	High battery voltage shutdown	Inverting	• Check for external charging sources, such as an over voltage
	> 15.5 volts DC			alternator, and disconnect if necessary.
	AC output overload shutdown	Inverting	• Reduce the loads connected to the AC outlet of the unit.
			• Check appliances that have high-surge ratings and disconnect if
				necessary.
	Over-temperature shutdown	Inverting	• Reduce the loads connected to the AC outlet of the unit.
			• Check that the ventilation grille is not blocked.
			• Check for ambient temperature and move the unit to a cooler
				location whenever possible.
975-0390-01-01			35