Xantrex Technology 806-1055-02, 806-1840 Display Panel All Models Remote and Power Module Panel

Freedom HF InvChg Owners Guide.book Page 7 Tuesday, April 29, 2014 12:10 PM

Features

Display Panel (All Models)			Remote and Power Module Panel
			(Freedom HF 1055 EMS,1800 EMS)
3	1	2
4		HF	1	2
STATUS
Utility	Input Voltage (V)
Battery	Select Input Current (A)
Fault	Output Power (kW)

Feature Description

1Inverter Power button is the main unit switch that turns the Freedom HF’s inverter function ON or OFF. See page 15 for additional information.

2Three-digit LED display screen shows status information and fault codes. See page 15 for additional information.

3Status LED indicates the mode of operation with a three-color LED. See page 15 for additional information.

4Select button changes status information displayed on the display screen. See page 15 for additional information.

IMPORTANT: See “Display Panel Operation” on page 15 starting on page 15 for detailed information on operating the panel’s buttons.

Feature	Description
1	Remote jack is used for connecting the Display panel that ships with the
	Freedom HF 1055 EMS and 1800 EMS. Each shipment comes with a 25-foot
	communications cable as well.
2	Power module has one fuse and three contacts for wires that connect to:
	• an auxiliary 12-volt DC OUT terminal,
	• an Ignition Control terminal, and
	• a Disabled terminal.
	NOTE: The Ignition Control and Disabled terminals are connected
	by a jumper wire that acts to disable ignition control. Removing the
	jumper wire will enable ignition control.

For instructions on how to enable or disable Ignition Control, see the

Installation Guide.

975-0390-01-01 7