Xantrex Technology 806-1840, 806-1055-02, 806-1544, 806-1054-01 manual 

Freedom HF InvChg Owners Guide.book Page 36 Tuesday, April 29, 2014 12:10 PM

Warning Messages

Table 7 Error Codes Displayed on the Display Panel Screen

Error Code	Condition	Mode	Action
	Low battery voltage detected	Inverting	• Check battery status and recharge if necessary.
	depending on setting, see		• Check for proper DC cable sizing.
	“Operating Limits” on page 22.		• Check for loose connections and tighten if necessary.
	AC output overload warning	Inverting	• Reduce the loads connected to the AC outlet of the unit.
	Over-temperature warning	Inverting	• Reduce the loads connected to the AC outlet of the unit.
			• Check that the ventilation grille is not blocked.
			• Check for ambient temperature and move the unit to a cooler
			location whenever possible.
	not used
	not used
	High battery voltage (> 15.5 V)	AC shore power	• Check for external charging sources, such as an over voltage
			alternator, and disconnect if necessary.
			• Confirm that the external charging source is not the cause. The error
			may be caused by the internal battery charger system. Call Xantrex
			for support.
	Over-temperature detected on	AC shore power	• Reduce the loads connected to the AC outlet of the unit.
	the AC transfer relay		• Check that the ventilation grille is not blocked.
			• Check for ambient temperature and move the unit to a cooler
			location whenever possible.

36 Freedom HF Owner’s Guide