Freedom HF InvChg Owners Guide.book Page 41 Tuesday, April 29, 2014 12:10 PM
|
|
| Troubleshooting Reference |
|
Table 8 Troubleshooting Reference |
|
|
| |
|
|
|
|
|
Problem |
| Possible Cause | Solution |
|
|
|
|
|
|
No output voltage. The status LED is not |
| The jumper wire on the power module | Ensure the jumper wire is installed if the ignition control feature |
|
lighting up. |
| panel connecting the “Ignition Control” | is not in use. If the ignition control feature is in use, ensure the |
|
|
| and “Disabled” terminals is removed | vehicle’s ignition is on. |
|
|
| and there is no ignition signal present. |
|
|
|
|
|
|
|
The fan turns on and off during AC shore |
| • The battery is discharged and | Do not be alarmed, the unit is performing normally. |
|
power mode. |
| demands high current from the |
|
|
|
| charger. |
|
|
|
| • AC |
|
|
|
|
|
|
|
The fan turns on and off during inverter |
| The inverter is running continuously at | Do not be alarmed, the unit is performing normally. The fan is |
|
mode. |
| high power. | activated automatically. |
|
|
|
|
|
|
41 |
