![](/images/backgrounds/92629/92629-8424x1.png)
Installation
Installing the Mounting Bracket
The mounting bracket is designed to be affixed to the vertical structure or surface to which the GT Inverter will be mounted. The GT Inverter mounting hooks attach to the flanges on the mounting bracket.
If mounting more than one inverter, install each mounting bracket at least 15 cm (6 inches) apart to provide enough space for the inverters to hang side by side.
Mounting bracket
25.3 (10)
Rectangular slots × 25:
0.8 × 3 (5/16 × 1 3/16)
Mounting flanges
All measurements in cm (inches).
1.3(1/2) from side of bracket to knockout center
Back side of the inverter
3/4) | Mounting hooks | |
57.9 (22 | ||
|
3.8 (1 1/2) from bottom of bracket
to knockout center
Mounting slots for securing the inverter
Figure