Status Indicator Lights

Status Indicator Lights

The GT Inverter has two status indicator lights (LEDs) located below the front panel LCD (Figure 5-2). These LEDs indicate the inverter’s status (Table 5-11) and assist in troubleshooting the performance of the unit.

Only one indicator light will be lit at any time.

Table 5-11

Status Indicator LEDs

LED on

Means

GREEN

GT Inverter is on (DC voltage and AC voltage are qualified and the

 

protection timer has finished) and delivering power. No action

 

required. Turns off when a fault state is detected.

RED

Ground fault condition detected.

 

Check for any fault messages on the display (see Table 5-8), and refer

 

also to Table 6-1, “Troubleshooting the GT Inverter” on page 6–9 to

 

resolve the fault condition.

Green LED

Red LED

Grid Tie Solar Inverter

Figure 5-2Status Indicator Lights

975-0320-01-01

5–11