Xantrex Technology TS400 manual Comprehensive Protection, 7KLVSURWHFWLRQIHDWXUH«

Comprehensive Protection

Comprehensive Protection

TS400 is designed to meet UL 458 and CSA C22.2 No. 107.1 safety standards and it is compliant with FCC Class B.

TS400 comes equipped with numerous protection features to guarantee you safe and worry-free operation.

3URWHFWLRQ￿IHDWXUH	7KLV￿SURWHFWLRQ￿IHDWXUH«
Low voltage alarm and	Protects the battery from becoming completely discharged. The
shutdown	Low Battery light and audible alarm indicate that input voltage is
	low (10.7 volts). If the input voltage drops below 10.3 volts, the
	TS400 shuts down automatically and the Inverter ON light turns
	off. The TS400 recovers automatically when the input voltage
	comes up to about 12.6 volts.
High voltage shutdown	Protects the TS400 by disabling the AC output when the input
	voltage rises to 15.3 volts or more. The AC output is enabled when
	the input voltage drops to 14.5 volts.
Over-temperature	Disables the AC output of the TS400 when the internal temperature
shutdown	rises to unacceptable levels due to higher ambient temperature or
	overloading. The TS400 recovers automatically when it cools
	down.
Overload protection	Disables the AC output of the TS400 if the appliance connected to
	the inverter exceeds the 400 watt rating of the inverter. The TS400
	will have to be reset. (See “Resetting After a Fault or Shutdown” on
	page 3–7.)
Supplemental circuit	Trips and disables the AC output when a current in excess of 7.5
protection	amps is drawn from the TS400. The supplemental circuit protector
	can be reset to enable the unit to operate again after clearing the
	overload condition. (See “Resetting After a Fault or Shutdown” on
	page 3–7.)
Short circuit protection	Disables the AC output of the TS400 when a short circuit is applied
	on the AC output. Once the short circuit is cleared, the TS400 will
	have to be reset. (See “Resetting After a Fault or Shutdown” on
	page 3–7.)
Ground fault circuit	Trips and disables the output of the TS400 when a ground fault
interrupter (GFCI)	current is detected. The output can be enabled again by resetting the
	GFCI, once the ground fault is cleared. (See “Ground Fault” on
	page 3–7.)

975-0055-01-01 1–3