Preparing for Installation
❐Appropriately sized connectors. Two DC connectors suitable for ¼ inch (6 mm) that go on the DC input cable terminals. The other cable connectors will depend on your installation.
❐Crimping tool for fastening lugs and terminals on DC cables (You may find it more convenient to have the crimp connectors attached by the company that sells you the cable.)
❐DC fuse and Disconnect or DC circuit breaker (See page
❐Four #10 hardware fasteners to mount the TS400
❐Four #6
Materials for AC output hardwiring
❐Cable requirements:
•within the range of No. 14 to No. 18 AWG (minimum size)
•3 conductors
•solid or stranded
❐1/2 inch cable clamp
