Important Safety Instructions
4.To reduce the risk of electrical shock, disconnect DC power from the inverter before working on any circuits connected to the inverter. Turning the On/Standby switch to Standby (
) will not reduce this risk.
5.Protect the inverter from rain, snow, spray, and water.
6.To reduce the risk of overheating, keep the ventilation openings clear, and do not install the inverter in a compartment with limited airflow.
Precautions When Working With Batteries
WARNING: Explosion and Fire Hazard
1.To reduce the risk of battery explosion, follow all instructions published by the battery manufacturer and the manufacturer of the equipment in which the battery is installed.
2.Make sure the area around the battery is well ventilated.
3.Never smoke or allow a spark or flame near the engine or batteries.
4.Use caution to reduce the risk of dropping a metal tool on the battery. It could spark or short circuit the battery or other electrical parts and could cause an explosion.
Explosive Gas Precautions
1.Batteries generate explosive gases during normal operation. Be sure you follow all relevant instructions exactly before installing or using your inverter.
2.This equipment contains components which tend to produce arcs or sparks. To prevent fire or explosion, do not install the inverter in compartments containing batteries or flammable materials or in locations that require
viii |
