Operation
If the On/Standby switch on the TS400 is in the On (
) position and the optional S400 Remote Switch is in the Standby ( 
) position (see “Important” on page
Using the Optional S400 Remote Switch
| The S400 Remote Switch performs the same function as the On/Standby | ||
| switch on the TS400. | ||
|
|
|
|
| Important: For the Remote Switch to function, the On/Standby switch | ||
| on the TS400 must be turned to the On ( |
| ) position. |
|
| ||
|
| ||
Purpose | The S400 Remote Switch provides On/Standby control of the TS400 from | ||
| a convenient location of up to 25 feet (7.5 meters) away using the | ||
| supplied telephone cable. | ||
Cable length | You can use a longer cable up to a maximum recommended length of 50 | ||
| feet (15 meters). Xantrex recommends using a high quality | ||
| telephone cable wth | ||
Inverter ON 
