Xantrex Technology TS400 manual DC Cables, Hdfkfdeoh

Installing the TS400

DC Cables

For the best load starting performance, the DC cables should be as short and large as possible. See Table 2-1for minimum recommended cable size. Using a smaller cable may cause the inverter to shut down under heavy load. A larger cable may be used.

Table 2-1Minimum Recommended DC Input Cable (copper) — AWG

&DEOH￿/HQJWK￿￿%DWWHU\￿WR￿,QYHUWHU	0LQLPXP￿5HFRPPHQGHG￿
￿HDFK￿FDEOH￿	&DEOH￿6L]H￿³￿$:*
0–10 feet (0–3 meters)	No. 6
10–15 feet (3–4.5 meters)	No. 4
15–30 feet (4.5–9 meters)	No. 2
30–40 feet (9–12 meters)	No. 0

DC Fuse and Disconnect or DC Circuit Breaker

If you are using a DC fuse and Disconnect, a maximum 80 amp Class T fuse shall be used for the DC fuse. A fuse of lower rating can be used, but it shall not be lower than 60 amp Class T. The Disconnect shall be rated at least 50 amps.

Additionally, a DC circuit breaker rated 50 amps can be used.

975-0055-01-01 2–9