Xantrex Technology TS400 manual Monitoring the Operating Status, Ljkw Roru 6WDWXV $FWLRQ

Operation

Monitoring the Operating Status

The operating status of the TS400 is indicated by three lights on the front panel and an audible alarm. See Table 3-2.

For an illustration of the indicator lights on the front panel, see “Front

Panel of the TS400” on page 3–2.

If none of the front panel lights are on, see “Troubleshooting Reference” on page 4–2.

Table 3-2	Status of Indicator Lights and Alarm
/LJKW		&RORU	6WDWXV	$FWLRQ
Inverter ON		Green	When the TS400 is on, the Inverter	You can run your equipment using
			ON light illuminates.	energy from the battery.
Low Battery &		Yellow &	When the Low Battery and	You can run your equipment but your
Inverter ON		Green	Inverter ON lights illuminate, your	battery level is low. Charge your
(with audible			battery level is low. (The battery	battery.
alarm)			voltage has dropped below 10.7
			volts DC.)
Low Battery		Yellow	When only the Low Battery light	You cannot run equipment. Charge
(with audible			illuminates, your battery level is	your battery.
alarm)			critically low. (The battery voltage
			has dropped below 10.3 volts DC.)
Fault		Red	The Fault light illuminates	You cannot run equipment as the AC
			whenever there is a battery over-	output is disabled. Clear the fault
			voltage fault condition (exceeds	condition. Reset the TS400 by
			15.3 volts), output overload fault	turning the On/Standby switch to
			condition or over-temperature	Standby (	) and then to On (	).
			fault condition.

3–6 975-0055-01-01