Xerox 1235 manual Paper Tips

Paper Tips

Paper Tips

Caution

Do not use any media designed for inkjet printers, especially inkjet coated paper and inkjet transparencies. Inkjet media is coated with a substance that can damage printer components. Damage caused by using non-supported media is not covered by the printer’s warranty. Always use Xerox Phaser media that has been specially designed for use with your printer.

Use only Xerox Phaser 35 Series Transparencies. Other transparencies may cause damage to the fuser. Any damage that is caused due to the use of unsupported media is not covered by your printer’s warranty.

0730-23

■For specialty media, use the Multi-Sheet Bypass Feeder (MBF) with the Face-up output bin open at the rear of the printer; refer to page 26.

■For best results, use Xerox Phaser paper; it is guaranteed to produce excellent results on your Phaser 1235 printer.

■A low-paper message is displayed when there are approximately 30 to 40 sheets of paper remaining in the paper tray.

■Auto tray switching is available. When one tray runs out of media, the printer switches to the next tray that contains the same media size. If you do not have a second tray, a Load Tray 1 message appears on the front panel.

■While Tray 1 is printing, Tray 2 and Tray 3 may be loaded with paper.

16 Phaser 1235 Color Printer