■When sending a Multi-Sheet Bypass Feeder (MBF) job from the driver, the printer prompts you to load the correct media if the media does not match what you previously loaded.
■If a different media size is loaded in the MBF than what is selected in the driver, the printer stops and the front panel prompts you to load the correct media size in the MBF.
Loading the Multi-Sheet Bypass Feeder (MBF)
1.Open the Multi-Sheet Bypass Feeder tray and unfold the single extension (a).
2.Open the Face-up output bin at the rear of the printer and swing out the two extensions where the media will exit (b).
a
b
0730-30
■The Multi-Sheet Bypass Feeder (MBF) does not automatically detect paper size.
■Automatic 2-Sided Printing is not available with the Multi-Sheet Bypass Feeder.
3.Insert the media and adjust the guide for the media width:
■For Xerox Phaser 35 Series Transparencies, refer to page 30.
■For Xerox Phaser Color Laser Labels, refer to page 34.
Multi-Sheet Bypass Feeder
